Chromatography Autosampler Vials Only
Microsolv Technology Corporation VIALS SCREW GLASS INSERT AMBER
502270570 VIALS SCREW GLASS INSERT AMBER
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear / Clear Insert, 300ul with Write-On Patch and fill lines, Fused Insert™. Deactivated. An 11mm snap ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vial and inserts are made with first hydrolytic, Class A, Type 33, Deactivated / Silanized, Borosilicate Glass. The Write-On Patch is ceramic and will resist smearing or scratching even when working with solvents. Compares to QSerts™ brand vials for performance but lower priced and a great value. Insert bottom depth, heights and alignment are designed, and QC controlled for maximum recovery and needle safety. The AQ™ Brand Fused Inserts sit slightly above the top lip of the vial and this unique feature allows for a near perfect seal with the cap's septa. These inserts are not attached to the bottom of the vial and do not suffer from cracking at this "fused" point and prevents leaking which may be observed in competitive brands. Silanized to minimize hydrophilic compound adsorption to the glass.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear, 1.2ml, MRQ™, Deactivated, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type-33 Deactivated / Silanized, Borosilicate Glass. The MRQ Vials have a fill volume of 1.2ml and a very low residual volume of 2ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom with a well that is slightly larger than autosampler vial needles, with side entry ports to recover the maximum amount during use. Bottom depths of the wells are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials. This product is manufactured in an ISO 9001:2015 Certified facility.
Grainger Crimp Fitting 90 Deg 5/8 ID 5/8 FBSPP
The Grainger 16P798 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is thermally protected and rated for continuous duty applications. It features a cast iron frame, end brackets and conduit box. The motor is CSA certified and UL listed.
Grainger Crimp Fitting 90 Deg 1/4 ID M14-1.5 F
The Grainger 16P834 is a 3/4 HP, 115V, 1725 RPM, 56C frame, open drip proof, single phase, ball bearing electric motor. It has a 1.15 service factor and is thermally protected. The motor is totally enclosed, fan cooled (TEFC) with a cast iron frame. It has a standard NEMA frame with a C-face mounting. The motor is designed for general purpose applications.
Grainger Crimp Fitting 1/2 I.D. M24-1.5 M Metric
The Grainger Approved Crimp Fitting is a copper crimp fitting used to join copper tubing. It has a 1/2 inch trade size and is made of wrought copper. The fitting meets SAE J2051 specifications and is UL listed. It can withstand up to 300 psi of pressure at 250 degrees Fahrenheit. The crimp fitting requires a crimping tool to secure tubing. This product provides a reliable copper to copper connection.
Grainger Crimp Fitting 90 Deg 5/8 ID M26-1.5 F
The Grainger Approved Crimp Fitting is a copper crimp fitting used for joining copper tubing. It has a 1/2" nominal pipe size and is made of wrought copper. The fitting has a pressure rating of 300 psi at 73°F and is NSF/ANSI 61 certified. It can be used for hot and cold potable water applications. The crimp fitting requires a crimping tool to secure the tubing. It provides a permanent, reliable connection and is ideal for residential and commercial plumbing and hydronic heating applications.
Grainger Crimp Fitting 3/8 I.D. M20-1.5 M Metric
The Aeroquip 16P882 hydraulic crimp fitting is made of steel and has a 1/4" NPTF thread. It is designed for use with 1/4" OD tubing and has a working pressure of up to 5000 psi. The fitting has a hex nut for tightening and can be reused. It requires a hex crimping tool to properly secure tubing. This fitting allows easy assembly of hydraulic lines using crimp technology. The steel construction makes it durable and suitable for industrial applications. Overall, it is a quality hydraulic crimp fitting for use with 1/4" tubing in high pressure hydraulic systems.
Grainger Crimp Fitting 90 Deg 5/8 I.D. M30-2 F
The Grainger 16P876 is a 1/4 HP, 115V, 60Hz, 1-phase, 3450 RPM, 56C frame, open drip proof, continuous duty, C-face electric motor. It has a 48Y frame size with a 1.25" shaft diameter and 1.38" shaft height. The motor is thermally protected and rated for indoor use. It has ball bearings and meets NEMA design B specifications. The 16P876 has a full load current of 5.8 Amps and is suitable for operating pumps, fans, and other industrial equipment.
Grainger Crimp Fitting 90 Deg 1 ID M36-2 F
The Grainger 16P841 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads are made in the USA and can be used for a variety of cleaning applications including pots, pans, dishes, countertops, floors, walls, appliances, automobiles, machinery, and more. The open web design allows dirt and debris to move through the pad during use.
Grainger Crimp Fitting 45 Deg 1/4 ID M16-1.5 F
The Grainger 16P827 is a Westinghouse 15 Amp, 125 Volt, 3-Wire Grounding Plug with Straight Blades and Side Wire Holes. It has a NEMA 5-15P configuration with a black, white and green wire connection. The plug is UL Listed and CSA Certified. It is made from high strength thermoplastic and has side wire cavities that accept up to #10 AWG wire. The plug can be used on appliances, power tools, machinery and equipment up to 15 amps and 125 volts. This is a standard 3-prong grounded plug for providing safe electrical connections.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear, 2ml, with Write-On Patch and fill lines, 10-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial or storage bottle. 100/PK.
First hydrolytic, Class A, Type N51A pharmaceutical grade, Borosilicate Glass. Features a wide mouth opening for easy filling and ND10 threads. Write-On Patch and fill lines are epoxy paint for reduced smearing.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear, 1.1ml, Tear Drop shape MicrovVial, 8-425mm threads, 11.6x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vials, Screw Top, Glass. Clear, 1.1ml, Tear Drop shape MicrovVial, 8-425mm threads, 11.6x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear / Clear Insert, 300ul Fused Insert™, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vials and inserts are first hydrolytic, Class A, Borosilicate Glass, with a wide bottom, 300ul, inserts fused to the bottom of the vial. The wide bottom helps prevent bubble formation when filling quickly or with automation. Our most economical Fused-Insert Vials. For budget minded laboratories.
Microsolv Technology Corporation Vials, Crimp Top, Glass. Clear, 0.2ml. An 8mm Serum Finish with 5.5x31.5mm outer dimensions and a conical bottom. For use as an autosampler vial. 1000/CS.
First hydrolytic, Class A, pharmaceutical grade, Borosilicate Glass. Use with 8mm aluminum crimp caps, 8mm or 9mm push caps. These conical vials have serum finish tops that provide the best seal for chromatography, when used properly with correct aluminum crimp caps. These MicroVials have a conical outer shape and often need a holder / adapter to be used in an autosampler and will not stand by themselves.